Braided stainless steel brake line kit for 65-66 Mustangs with original style
Kelsey Hayes 4 piston calipers. Ends are factory precision crimped to eliminate leakage. Teflon inner liner and stainless steel braid eliminates hose expansion, common to original lines resulting in better braking performance and a firmer pedal feel! Stainless steel braid is coated in a thick polymeric covering to prevent dirt and other abrasive contaminants entering the braid. This covering provides a significant increase in hose life.
- 2 x Teflon lined, stainless steel braided
hoses. Hose meets DOT MVSS-106 requirements.
- 2 x Adapters for
the end of the hose to the calipers (3/8-24).
- 2 x Crush washers.
2 x Adapters for the end of the hose to OE
hard line with 3/8-24 tube nut. Fitting includes groove for OE style brake line clip
- 2 x Brake line clips.
Note: Rarely, a 7/16" tube nut may be installed onto your hard lines.
If this is the case, you will need two of the -3 to 7/16-24 I.F. adapters shown
- 1965-66 Mustangs using original style Kelsey Hayes
4 piston cast iron calipers with 3/8" inlet.