Vintage 60 17x9.5
The Vintage 60 17 x 9-1/2 has 10 spokes and is styled similar to the wheels used on the original GT40 cars from the 60s. It has a media-blasted center and spoke area and polished outer barrel. The center disc is manufactured from virgin 356 aluminum ingots and heat-treated to a T6 factor. The outer barrel is made from spun 6061 sheet aluminum and has a fully polished front surface. It comes with a standard 5-1/2" backspace (+6mm offset) or 6" backspace (+19mm offset) and is available with custom back spacing in a range from 3-3/4" to 6-1/2". Backspace outside this range is possible but it will alter the appearance of the wheel. Please see picture below. This wheel has 7/8 clearance from the axle plane to the backside of the spokes. Includes standard center-cap and lug nuts.We have the ability to increase the backspace of our two-piece wheels an additional ¾" beyond the standard manufacturing range listed for each wheel. Doing so will alter the appearance by having the center disc protrude (stick out) beyond the drop center of the outer barrel. This creates a visible ridge where the two pieces connect. Please see the pictures below to see how this alters the appearance of the wheel. These wheels are available in: Ford (5 on 4-1/2"), GM (5 on 4-3/4"), and 5 on 5" bolt patterns. Please specify when ordering.
Includes V60
cap as standard or upgrade to the Tri-bar
knock off.
