Checkout the 'ST Products' section for more info.

Introducing 3 more Street or Track designed and manufactured products:

Rear disc conversion for 8 & 9" small bearing rear ends with 16" or larger wheels

Rear disc conversion for 8 & 9" small bearing rear ends with 15" or larger wheels

1994-2004 SN95 Cobra Conversion Brackets for 1965-73 Mustang drum spindles

We've also teamed up with Race Car Dynamics to bring you custom valved Bilstein shocks for your 1965-70 Mustang. By custom tailoring the shim stack we are able to tune the valving and match a shock to your spring rate and driving style. Front shocks are offered in three flavors:

Street, Sport & Race.

For the rear of 8" & 9" small bearing rear ends we have a new brake kit almost ready.  Using a 11.65" diameter vented rotor, this kit will be the perfect complement to our front 13" kits.

Also coming soon are a set of brackets that will allow you to use SN95 (1994-2004) 13" Cobra rotors and calipers on your 65-73 drum spindles & hubs! 

Stay tuned for release information on these 2 new products!

Kit uses 13x1.1" directional plain rotors & 2 piston aluminum PBR calipers - the same ones used on late model Cobra's.  Custom designed and CNC machined brackets mount the caliper anchor to your drum spindles with no modifications required.  DOT legal braided steel flex hoses are also included.

Of course, new bearings, seals, bearing retainers, cotter pins, dust caps and all the brackets, bolts, fittings are included.

Click here for more product details and pictures.

Kit uses either a 11-1/4" slotted/cadmium plated rotor, long-life cryo-treated option or a plain option for open trackers and guys with closed wheels or those that don't care for the slotted upgrade. Uses either 2x38mm piston aluminum PBR Cobra calipers with Performance Friction Z rated pads or 2 x 40mm Red Bullitt special edition that come with metallic pads. Included is a late model aluminum M/C that weighs only 2.2lbs & gives perfect pedal effort to a stock pedal. DOT legal braided steel flex hoses are also included.

Of course, new bearings, seals, bearing retainers, cotter pins, dust caps and all the brackets, bolts, fittings and even some new hard line to go from the new master to your existing hard lines.

Not sure what size wheels & tires will fit?

Rent our Wheelrite Wheel & Tire Simulator!

Simply bolt the WheeRite on your hub, dial in your measurements and rotate to verify your desired clearance!

Save $20 on a set of wheels when you rent this tool!

Click HERE for more information